Technical library
Technical Guides
Practical technical guides for engineers and buyers who specify, purchase or repair industrial gears and gearboxes: how to prepare a gear quotation request, when to repair or replace a gearbox, why gears fail, how spare parts are reverse engineered, and how gear materials and heat treatments are chosen.
-
How to Request a Quote for a Custom Industrial Gear
The data that define a custom gear, what to send when there is no drawing, a complete RFQ checklist and the most common mistakes that delay a gear quotation. -
Gearbox Repair or Replacement: Technical Considerations
Symptoms, inspection, decision factors and repair options for industrial gearboxes, with a decision table to choose between repair, upgrade and replacement. -
Common Causes of Industrial Gear Failure
The main gear failure modes (wear, scuffing, micropitting, pitting, case crushing, tooth breakage), how to recognise them, their root causes and how to prevent them. -
Reverse Engineering of Mechanical Spare Parts: Method, Limits and What to Send
When to remake a part from a sample, how worn parts are measured and gear data recovered, how material and heat treatment are identified, and the limits you should know before ordering. -
Gear Material and Heat Treatment Considerations
Case-hardening, through-hardening and nitriding steels; carburizing, nitriding, nitrocarburizing, induction hardening and quench and temper; CHD, SHD and NHD definitions; distortion, grinding allowance and drawing notes.
Why we publish these guides
Most delays in a gear or gearbox project start with missing information: a drawing without heat-treatment data, a worn part sent without its mating gear, or a failure analysed only after the evidence has been cleaned away. These guides explain, in plain technical terms, what to check and what to send so that a part can be quoted, manufactured or repaired correctly the first time.
The guides contain general engineering information. They cite standards by name for orientation; always work to the edition your contract or drawing specifies. They are not design advice for a specific application: the responsibility for selecting and applying a component remains with the equipment owner or designer unless agreed otherwise in writing (see our terms of use).
When you are ready to act on a guide, these pages show what we do in practice: industrial gears, gearbox repair and overhaul, reverse engineering and heat treatment. Or send us your request directly.
A question the guides do not answer?
Send us the drawing, photos or failure description; an engineer will reply.
Please attach your technical drawings and specifications to your email.