Products

Industrial Spare Parts Made to Drawing or Sample

TSIRIKOS manufactures industrial spare parts for plants and machines: from your drawing, from a worn sample, or as replacements for OEM parts that are no longer available. Gears, pinion shafts, shafts, bushes, couplings, pump parts and extruder parts are made, heat treated and inspected in our workshop in Piraeus, Greece.

Gear pump body with two meshing spur gears

Main applications

How we supply spare parts

  • Made to your drawing

    The part is manufactured to the drawing and specification you provide, after a technical review.

    Learn more : Made to your drawing
  • Made from a worn sample

    The original part is measured, wear is compensated, a drawing is prepared for your approval, then the part is made.

    Learn more : Made from a worn sample
  • Replacement of obsolete OEM parts

    Replacement gears, bevel sets and other parts for machines whose manufacturer no longer supplies them.

  • Improved replacement parts

    Where the original failed early, a different material or heat treatment can be proposed for your approval.

  • Urgent breakdown requests

    Urgent requests are reviewed case by case; the feasible delivery date is stated in the written quotation.

  • Parts for plants abroad

    Spare parts manufactured in Greece and shipped to customers abroad, mainly in North Africa and the Mediterranean.

    Learn more : Parts for plants abroad
  • Typical lead times

    Indicative manufacturing times per part family.

Spare parts for machines that must run again

When a gear, shaft or pump part fails, the question is not only “who can make it?” but “what do we need to make it right?”. TSIRIKOS manufactures industrial spare parts to customer specification: from a drawing, from a worn sample, or as a replacement for an OEM part that is no longer available. We do not keep a catalogue of standard parts; each spare part is made for the specific machine.

Typical spare parts are industrial gears, shafts and pinion shafts, couplings and bushes, pump gears and rotors, extruder screws and barrels, and parts for crushers, mills and conveyors.

Three routes to a spare part

From your drawing

If you have a drawing, the part is made to it after a technical review of tolerances, material and heat treatment. This is the most direct route — see manufacturing from drawings.

From a worn sample

If there is no drawing, the original part is measured. Worn surfaces are reconstructed, gear data such as module, pressure angle and helix angle are determined, and the material and heat treatment are identified as far as possible. A drawing is prepared for your approval before production — see reverse engineering.

Replacing obsolete OEM parts

Older machines often outlive their manufacturer’s spare-parts support. Replacement gears, bevel sets, shafts and bushes can be made for such machines from the old part or its mating part. The customer remains responsible for having the right to reproduce a part.

How to identify the part

The better the data, the faster the technical review. Collect:

  • the machine make, model and serial number, and the position of the part in it;
  • the OEM part number, if there is one;
  • photos of the part from several sides, with a scale or ruler, and of the mating parts;
  • main dimensions: bore, outside diameter, length, number of teeth;
  • a short description of the failure: wear, breakage, noise, after how long in service.

For gears, our guide on how to request a quote for a custom gear lists the data that defines a gear.

Breakdown or planned maintenance

During a breakdown, the time to manufacture a heat-treated, ground part is set by the process: material, machining, heat treatment, grinding and inspection follow one another. We do not publish standard lead times; the delivery date we can commit to is stated in each quotation. For critical parts — pinion shafts of a main drive, gear sets with long manufacturing times — ordering spares during a planned shutdown, while the old part can still be measured, avoids an emergency later.

Documentation

On request, parts can be supplied with inspection documents to EN 10204 and heat-treatment records. When a drawing has been prepared from a sample, the approved drawing serves as the reference for repeat orders.

For plants outside Greece

All parts are manufactured and inspected in Greece; the company has no facility, agent or stock abroad. Customers abroad send their request in the same way, and transport and delivery terms are agreed for each order. Read more on our export page, or send your data through the request a quote page.

Manufacturing approach

  1. Identify the part

    Drawing, OEM part number, nameplate data, photos, dimensions and the machine it belongs to.

  2. Technical review

    We check the data, ask questions and decide whether a drawing, a sample or the mating part is needed.

  3. Written quotation

    Price, scope, inspection documents and the delivery date we can commit to for this part.

  4. Manufacturing and heat treatment

    Machining, gear cutting, heat treatment and grinding in our own workshop.

  5. Inspection

    Dimensional, hardness and roughness checks; inspection documents if ordered.

  6. Packing and dispatch

    Packed for transport and shipped under the delivery terms agreed in the order.

Quality considerations

  • Check against drawing and mating parts

    Critical dimensions and fits checked against the approved drawing and, where available, the mating parts.

  • Hardness after heat treatment

    Hardness measured on the treated surfaces.

  • Gear tooth form

    Tooth form inspection on replacement gears and pinion shafts.

  • Inspection documents

    Inspection documents to EN 10204 on request; type 3.2 requires an independent or customer inspector.

    Learn more : Inspection documents

Technical FAQ

The OEM no longer supplies the part. Can you make it?

Yes, provided we have a drawing, the old part or its mating part. The part is measured, a drawing is prepared for your approval and the replacement is manufactured to that drawing.

How quickly can you supply a part during a breakdown?

There is no general answer: it depends on the part, the material and the heat treatment. Send the data as soon as possible; the delivery date we can commit to is stated in the written quotation.

Do you supply plants outside Greece?

Yes. TSIRIKOS also produces for customers abroad, mainly in North African and Mediterranean countries. All parts are made in Greece; we have no facility abroad. Shipping and delivery terms (Incoterms) are agreed for each order.

Is it allowed to copy an OEM part?

The customer is responsible for having the right to have a part reproduced (drawings, patents, design rights). Replacement parts for your own maintenance are common practice, but please check any contractual restrictions with the equipment supplier.

Can a replacement part be better than the original?

Sometimes. If the original wore or broke early, a different material, heat treatment or surface finish may help. Any change is proposed to you and made only with your approval.

What documents come with the part?

On request, inspection documents to EN 10204 and heat-treatment records. Please state the required document type in your request.

Request for quotation — Industrial Spare Parts Made to Drawing or Sample

Replacement gears, shafts, bushes, pump parts and obsolete OEM components made from drawing or worn sample, for plants in Greece and abroad.

Please attach your technical drawings and specifications to your email.