Company
About TSIRIKOS: gear, gearbox and mechanical component manufacturer in Piraeus since 1965
N. & G. TSIRIKOS S.A. is a Greek manufacturer of industrial gears, gearboxes, shafts and custom mechanical components, founded in 1965 and based in Agios Ioannis Rentis, Piraeus. We make parts to the customer’s drawing or sample, carry out heat treatment and repairs in-house, and supply plants in Greece and abroad.
Who we are
N. & G. TSIRIKOS S.A. (Greek: Ν. & Γ. ΤΣΙΡΙΚΟΣ Α.Ε.Β.Ε., brand TSIRIKOS) is an industrial manufacturing company in Agios Ioannis Rentis, Piraeus, Greece. In short:
- What we manufacture: industrial gears (spur, helical, double-helical, bevel and spiral bevel, worm gear sets, internal gears), gearboxes and speed reducers, shafts and pinion shafts, splines, bushes, custom machined components and, since 1985, extruder screws and barrels for plastics machinery.
- How we work: no catalogue products. Every part is made to the customer’s drawing, specification or sample.
- Services: precision machining, gear cutting and grinding, heat treatment, assembly, and gearbox repair and overhaul.
- Typical sectors: equipment for steel and metallurgy, cement and mining, marine and ports, energy, plastics and rail equipment.
- Where: one site for production and administration in Piraeus, Greece. We have no branch or workshop abroad; parts for export are manufactured in Greece and shipped.
- How to reach us: send your drawing, photos or technical data through the request-a-quote page.
Company at a glance
- Quality management
- ISO 9001:2015
- Certified by InterCert GmbH, valid until 12.10.2028
- Founded
- 1965
- By the brothers Nikos and Giorgos Tsirikos
- Location
- Piraeus, Greece
- 28ης Οκτωβρίου 38, 182 33 Agios Ioannis Rentis
- Plastics machinery parts
- Since 1985
- Extruder screws, barrels and related parts
- Site area
- 12,000 m²
- Production and administration site in Agios Ioannis Rentis
History
Six decades of gear and machine-part manufacturing, from a Piraeus machine shop to an integrated plant.
-
1965: foundation
The brothers Nikos and Giorgos Tsirikos start manufacturing gears and machine parts in Agios Ioannis Rentis. Spur and helical gears are the core of the work from the start.
-
1985: parts for plastics machinery
The company adds the manufacture and repair of parts for plastics machinery: extruder screws, single and twin barrels and parts for injection machines.
-
1997–2000: EU research project
Participation in the EU BRITE/EURAM project BRPR970487 on new coatings for cutting tools, tested on drilling and gear hobbing (CORDIS record).
-
Today
Gear cutting and grinding, machining, in-house heat treatment, assembly, quality control and repair on one site in Piraeus.
Production base
One site in Agios Ioannis Rentis, Piraeus
Production and administration are located together in the industrial area of Agios Ioannis Rentis, Piraeus. Raw material, machining, gear cutting, grinding, heat treatment, assembly and inspection are carried out under one roof, so a part does not leave the plant between operations unless the customer asks for external testing or inspection.
- Turning, milling, boring and grinding of shafts, rings, housings and large parts
- Gear hobbing, spiral bevel gear generation and tooth-flank grinding
- Gas carburizing, nitriding, nitrocarburizing and induction hardening
- Assembly, inspection and repair of gearboxes
How the plant is organised
The plant is organised in the following departments.
-
Raw material stock
Storage and identification of bar, forgings and plate.
-
Lathe department
Turning of shafts, rings, discs and large-diameter parts.
-
Milling and boring
CNC and conventional milling, horizontal boring of housings.
-
Screw cutting
Threads, screws and splines.
-
Gear cutting
Hobbing and spiral bevel gear generation.
-
Grinding
Cylindrical, surface, gear, worm and screw grinding.
-
Welding and joining
Repair welding and metallizing as part of repairs.
-
Gas heat-treatment plant
Carburizing, nitriding and nitrocarburizing under protective atmosphere.
-
Induction heat treatment
Induction hardening, including large gears tooth by tooth.
-
Machinery repair and maintenance
Gearboxes, gears, pumps and special machinery.
-
Assembly
Gearbox assembly and gear mesh checks.
-
Quality control
Dimensional, hardness, roughness and gear checks.
-
Gear and gearbox design
Calculation and drawings for gears and gearboxes.
-
Management
Commercial, planning and administration.
Know-how and people
Our people combine long workshop experience with engineering education. Machine operators were trained by the manufacturers of the special machines we use, and continuous theoretical and practical training is part of how the company is run.
This know-how shows in the details customers care about: choosing a steel grade for the load case, setting a carburizing programme for the required case depth, leaving the right grinding allowance, and checking tooth contact before a gearbox is closed. See our quality and technical approach for how this is organised.
Corporate responsibility
Policy commitments stated by the company. No environmental or health-and-safety certification is claimed.
-
Health and safety at work
Compliance with applicable legislation, systematic identification of hazards, safe working procedures and well-guarded machines, and open communication with staff and partners.
-
Environmental protection
Improving energy efficiency, reducing and recycling waste, and considering resource use in purchasing decisions.
-
Responsible handling of used oil
Lubricants drained from gearboxes under repair are handed over to an authorised recycling body.
EU co-funding
EPAnEK 2014–2020: Quality Modernisation
N. & G. TSIRIKOS S.A. was included in the action “Quality Modernisation” of the Operational Programme Competitiveness, Entrepreneurship and Innovation (EPAnEK) 2014–2020. The investment, with a total budget of EUR 268,488.83 and public expenditure of EUR 134,244.42, was co-financed by the European Union (European Regional Development Fund) and by Greek national resources.
- Investment categories: machinery and equipment, quality management and certification systems, transport means, new staff
Learn more about TSIRIKOS
-
Manufacturing capabilities: gear design, machining, gear cutting, heat treatment, assembly and repair
Design, machining, gear cutting and grinding, in-house heat treatment, assembly, inspection and repair of gears, gearboxes and mechanical components. -
Quality and technical approach: inspection, heat-treatment control and documentation
Drawing review, material and in-process inspection, heat-treatment control, gear checks, EN 10204 inspection documents and the standards we work to. -
Why TSIRIKOS: one plant from gear design to heat treatment, grinding and assembly
Verifiable reasons to work with TSIRIKOS: in-house chain from design to heat treatment and assembly, experience since 1965, manufacture from drawing or sample, repair know-how. -
Industrial Gears, Gearboxes and Mechanical Components
Gears, gearboxes, shafts, transmission components, extruder screws and spare parts made to drawing or sample. -
Machining, Heat Treatment and Repair Services
Machining, manufacturing from drawings or samples, heat treatment and repair of gearboxes and mechanical equipment. -
Industries and Applications
Gears, gearboxes, spare parts and repairs for steel, cement and mining, ports, energy, plastics and rail equipment.
Have a drawing, a sample or a worn part?
Send us your technical requirements and we will review them and come back with questions or a quotation.
Please attach your technical drawings and specifications to your email.