FAQ

Frequently Asked Questions

Short, specific answers to the questions engineers and buyers ask us most often: who we are, what we manufacture and repair, how heat treatment and inspection are handled, and how quotations and deliveries abroad work. Each answer links to the page with the details.

Company and location

Who is TSIRIKOS?

N. & G. TSIRIKOS S.A. is a Greek manufacturer of industrial gears, gearboxes and mechanical components, founded in 1965 by the brothers Nikos and Giorgos Tsirikos. It manufactures to customer drawings or samples and repairs gearboxes and other mechanical equipment. More on the company page.

Where are you located, and where are the parts made?

Production and administration share one site at 28ης Οκτωβρίου 38, 182 33 Agios Ioannis Rentis, in the Piraeus area of Attica, Greece. All manufacturing is carried out in Greece; the site houses the company’s machining, gear-cutting, heat-treatment and assembly departments. See our capabilities.

Do you have an office, agent or workshop abroad?

No. TSIRIKOS has no facility, office or agent outside Greece. Customers abroad deal with us directly; parts are manufactured in Greece and shipped on the terms agreed for each order. See our export page.

Do you sell standard catalogue products?

No. Every part is made to the customer’s drawing, specification or sample, with the tolerances the customer specifies. If you need stock gears, chains or rolling bearings, a catalogue distributor is the better choice; if you need a part made for your machine, send us a request.

In which languages can we correspond?

We correspond in English and French as well as Greek. Requests, technical discussion, offers and documents can be in any of these three languages.

Products and manufacturing

Which types of gears do you manufacture?

Spur and helical gears, double-helical (herringbone) gears, straight and spiral bevel gears and crown wheel and pinion sets, worm and worm wheel sets, internal ring gears, and special gears such as ratchets, sprockets, spline hubs and Hirth couplings, all to drawing or sample. See industrial gears.

Do you build complete gearboxes?

Yes: custom gearboxes designed and built for a specific application, mainly parallel-shaft (helical) and bevel-helical (right-angle) designs, as well as gear sets, shafts and components for existing gearboxes, including planetary stages. See gearboxes and speed reducers.

What are the largest parts you can machine?

Gear cutting up to 4 m outside diameter and module 1 to 20, spiral bevel gears up to 1,000 mm outside diameter and module 13, and milling and boring of workpieces up to 3.5 × 7 × 5 m. Send your drawing and we will confirm feasibility for your specific part. The capacities are listed on the capabilities page.

Do you manufacture extruder screws and barrels?

Yes. Since 1985 the company has manufactured and repaired parts for plastics machinery: single and twin extruder screws, barrels and related parts, nitrided or nitrocarburized for wear resistance. See extruder screws and barrels.

Which materials do you work with?

Carbon and alloy steels (including case-hardening, through-hardening and nitriding grades), stainless steels, nickel alloys, aluminium, copper, brass and PTFE. Steels of special composition are selected and imported according to the application. See custom machined components and our guide on gear materials and heat treatment.

Can you make a part without a drawing?

Yes, from a sample or a worn part: we measure it, determine its geometry, define the material and heat treatment with you, prepare a drawing for your approval and then manufacture. See reverse engineering.

Repairs and spare parts

Which gearboxes do you repair?

Industrial gearboxes of different makes and types, including parallel-shaft, bevel-helical and planetary units, in our workshop: incoming inspection, dismantling, damage assessment, repair or replacement of gears, shafts and bearings, reassembly and contact-pattern check. See gearbox repair and overhaul.

Do I receive a report after a gearbox repair?

A maintenance report is provided for each repaired gearbox, stating the gearbox type and serial number, the work carried out and the parts repaired or replaced.

Can your technicians inspect equipment on site?

Yes. Our technicians carry out on-site inspection in Greece, and on-site support abroad can be provided, arranged case by case. Please describe your need in your request.

Can you supply spare parts for machines that are no longer supported by the manufacturer?

Yes. When the original part is no longer available, a replacement can be manufactured from the original drawing or from the worn part. See industrial spare parts and the guide on reverse engineering of spare parts.

Do you also repair gears, pump components and extruder screws?

Yes: gears (for example a new toothed rim on an existing gear body), pump components such as gears, rotors, shafts and bushes, and extruder screws and barrels, which are rebuilt, remachined and nitrided. See industrial mechanical repair.

Heat treatment and quality

Which heat treatments are carried out in-house?

Gas carburizing with oil quenching and tempering, carbonitriding, gas nitriding, nitrocarburizing, induction hardening (including tooth-by-tooth hardening of large gears), quenching and tempering, normalizing and annealing. See heat treatment.

Do you heat treat parts made by others?

Yes, heat treatment is also offered as a service for parts made elsewhere, for example aluminium extrusion dies. Send the drawing, the material grade and the required hardness or case depth.

Is TSIRIKOS ISO 9001 certified?

Yes. The quality management system is certified to DIN EN ISO 9001:2015 by InterCert GmbH (MTIC group), certificate no. 16-Q-0411040-TIC, valid until 12 October 2028, for the design, production, repair and maintenance of gears, gearboxes, mechanical components and systems and for steel heat treatment services. Download the certificate (PDF).

Which inspections are carried out?

Incoming material inspection, dimensional inspection, examination for surface cracks, hardness testing after heat treatment, roughness measurement after grinding and gear tooth form inspection. See quality and technical approach.

Can you supply EN 10204 inspection documents?

Inspection documents to EN 10204 (types 2.1, 2.2 and 3.1) can be agreed with the order. A type 3.2 certificate additionally requires an independent inspector appointed by the purchaser or named by the applicable regulations, so please state this requirement in your request.

Quotations, delivery and export

How do I request a quotation?

Use the request a quote page: the form prepares an e-mail to info@tsirikos.com, to which you attach your drawings and photos. You can also write directly to that address.

What should I send for a gear quotation?

At least the gear type, module, number of teeth, main dimensions, material, heat treatment and quantity, or a drawing or sample. Our guide how to request a quote for a custom gear lists every item with explanations.

What is the lead time?

There is no standard lead time: it depends on the part, material availability, the heat treatment required, the quantity and current workload. The delivery period is stated in the written quotation for your order.

Do you deliver to customers abroad?

Yes. The company also produces for customers abroad, mainly in North Africa and the Mediterranean. Delivery terms (Incoterms® 2020, with a named place) are agreed for each order; import clearance in the destination country is arranged by the buyer or the buyer’s customs broker. See Export.

Did not find your answer?

Send us your question together with a drawing, photos or a description of the part.

Please attach your technical drawings and specifications to your email.