Services · Repair

Industrial Gearbox Repair and Overhaul

TSIRIKOS repairs and overhauls industrial gearboxes and speed reducers in its workshop in Piraeus, Greece: incoming inspection, dismantling, damage analysis, replacement or repair of gears, shafts, bearings and housings, reassembly with gear mesh check and a functional check. Replacement gears and shafts are manufactured in-house, to drawing or from the worn part.

Large industrial gearbox with shrink-disc hollow shaft on skids for overhaul

Main applications

  • Parallel-shaft and bevel-helical gearboxes

    Drive gearboxes of conveyors, mills, crushers, mixers, cranes and process machinery.

  • Planetary gear units

    Overhaul of planetary stages, including planet carriers, planet gears, sun pinions and ring gears.

  • Gearboxes for belt conveyors in mines

    Manufacture and repair of gearboxes for belt conveyor lines in lignite mines.

    Learn more : Gearboxes for belt conveyors in mines
  • Power plant and port equipment

    Gearboxes of power-plant auxiliaries and gearboxes and wheels for port gantry cranes.

    Learn more : Power plant and port equipment
  • Extruder gearboxes

    Gearboxes driving extruders in plastics processing and recycling.

    Learn more : Extruder gearboxes

Scope of work

  • Incoming inspection

    On receipt: sealing, cleanliness of the breather, visual condition of the teeth, bolted connections and contamination inside the housing.

  • Load test where required

    Before or after the repair, a load test can check lubricant temperature, drive-end bearing temperature and noise behaviour.

  • Dismantling and damage analysis

    Lubricant removal, opening of the housing, dismantling and inspection of every component for wear, pitting, cracks and bearing damage.

  • New gears and shafts

    Replacement gears, pinion shafts and shafts manufactured in our plant, to the original drawing or by measuring the worn part.

    Learn more : New gears and shafts
  • Gear repair with a new toothed rim

    Where the gear body is sound, the worn toothed rim is removed and a new rim fitted and cut.

  • Shaft repair

    Worn journals repaired by grinding, or by heterogeneous welding or metallizing followed by final grinding.

  • Housing repair

    Cracked or damaged housings repaired by heterogeneous welding.

  • Bearing and seal replacement

    Worn bearings, seals and other wear parts are replaced as part of the overhaul.

  • Reassembly and checks

    Cleaning, reassembly, gear mesh (contact) check, closing of the housing and functional check.

  • Maintenance report

    A report for each repaired gearbox: type and serial number, work carried out, and parts replaced or repaired.

  • On-site inspection in Greece

    Basic or advanced inspections at the customer’s plant, as well as dismantling and reinstallation.

  • On-site support outside Greece

    We carry out inspection, removal and reinstallation at plants outside Greece, arranged case by case.

  • Back-to-back gearbox test rig

    Gearboxes are tested on our back-to-back test rig with vibration, temperature and noise analysis.

Gearbox repair in our own manufacturing plant

Gearboxes wear like every machine with rotating parts. Poor maintenance, operation beyond the design conditions and inadequate lubrication shorten their life. When a gearbox fails, the question is how quickly and how reliably it can return to service.

Our advantage is that repair and manufacturing happen in the same plant. When the inspection shows that a pinion shaft is pitted or a gear wheel is broken, the new part is cut, heat-treated and ground in our own departments: we do not depend on the original manufacturer’s spare-parts service.

How a gearbox overhaul runs

1. Incoming inspection

On receipt we record the nameplate data and the external condition: sealing, cleanliness of the breather, visible tooth condition through inspection covers, bolted connections and contamination in the housing. Where required, a load test before dismantling checks lubricant and bearing temperatures and noise.

2. Dismantling and damage analysis

The lubricant is drained (used oil goes to an authorised recycling body), the housing is opened and every component is cleaned and inspected. We record the damage mode, such as wear, pitting, scuffing, tooth breakage, bearing damage or cracks, because the cause matters as much as the damage: a gearbox that failed from misalignment or contamination will fail again if only the gears are changed. Our guide on common causes of gear failure describes the typical patterns.

3. Repair proposal

You receive the findings and a proposal: which parts are replaced, which are repaired and which can be reused.

4. Repair and manufacture of parts

  • Gears and pinion shafts: new parts manufactured to the original drawing or by reverse engineering of the worn part, with carburizing and tooth grinding where the original design requires it.
  • Gears with a sound body: the toothed rim can be removed and replaced by a new one.
  • Shafts: journals repaired by grinding, heterogeneous welding or metallizing and final grinding.
  • Housings: repair by heterogeneous welding.
  • Bearings and seals: replaced.

5. Reassembly, contact check and functional check

The gearbox is reassembled, the contact pattern of each gear pair is checked, the housing is closed and a functional check is carried out.

6. Maintenance report

For each repaired gearbox a maintenance report records the type and serial number, the work carried out and the parts replaced or repaired. It is a useful basis for your maintenance history and for the next planned shutdown.

Planned overhauls and breakdowns

A planned overhaul is always cheaper than an emergency. If you know a shutdown date, send us the gearbox data and the known problems in advance, so that long-lead parts such as large gears can be prepared. For the decision between repair and a new unit, see our guide gearbox repair or replacement and our page on gearboxes and speed reducers.

Customers outside Greece

All repairs are carried out in our workshop in Greece. For plants abroad, the gearbox or the damaged components are shipped to Piraeus; transport and delivery terms are agreed case by case. On-site inspection, dismantling and reinstallation abroad are also arranged case by case. Send nameplate photos and a description of the fault through the request for quotation page to start the assessment.

How we work

  1. Inspection on receipt

    External condition, oil, breather, seals and nameplate data are recorded.

  2. Dismantling and assessment

    Components are cleaned and inspected; damage modes and probable causes are noted.

  3. Repair proposal

    You receive the findings and a proposal: what to replace, what to repair, what can be reused.

  4. Manufacture and repair of parts

    New gears and shafts are machined, heat-treated and ground in-house; housings and shafts are repaired.

  5. Reassembly and functional check

    Bearings and seals are fitted, gear contact is checked and the gearbox is closed and run.

  6. Report and dispatch

    The maintenance report is issued and the gearbox is prepared for transport.

Quality considerations

  • Gear mesh contact check

    The contact pattern of each gear pair is checked during reassembly.

  • Hardness and dimensional inspection of new parts

    New gears and shafts are checked for dimensions, tooth form, hardness and surface roughness.

  • Temperature and noise check

    Where a load test is carried out, lubricant and bearing temperatures and noise are checked.

  • Used oil disposal

    Drained lubricants are handed over to an authorised recycling body.

Technical FAQ

Do you repair gearboxes from other manufacturers?

Yes. We offer preventive maintenance and repair for every type of speed reducer. If a part is no longer available from the original manufacturer, we can manufacture it.

Can you replace a broken gear if there is no drawing?

Yes. The worn or broken gear is measured, the gear data are determined and a new gear is manufactured after you approve the drawing. Ideally we receive the mating gear as well.

Is it better to repair or to replace a gearbox?

It depends on the housing condition, the damage to gears and bearings, the availability of original parts and the cost of downtime. Our technical guide on gearbox repair or replacement explains the decision factors.

Do you provide a report after the repair?

A maintenance report is made available for every repaired gearbox, with type and serial number, the work carried out and the parts replaced or repaired.

Can a gearbox be sent from abroad for repair?

The repair itself is always carried out in our workshop in Greece; we have no facility abroad. Transport and the delivery terms are agreed case by case for each order.

Do you send technicians to the plant?

Yes. We carry out on-site inspection, dismantling and reinstallation in Greece and abroad; visits outside Greece are arranged case by case.

Request for quotation — Industrial Gearbox Repair and Overhaul

Inspection, dismantling, damage analysis and overhaul of industrial gearboxes, with new gears and shafts made in-house and a maintenance report for each unit.

Please attach your technical drawings and specifications to your email.