Why TSIRIKOS

Why TSIRIKOS: one plant from gear design to heat treatment, grinding and assembly

Choose TSIRIKOS when you need a gear, gearbox or mechanical component made to a drawing or a sample, or a gearbox repaired, by a manufacturer that keeps design, machining, gear cutting, heat treatment, grinding, assembly and inspection under one roof. Below are the reasons that can be checked, without slogans.

Large double-helical gear on a heavy vertical gear hobbing machine

In short

Typical requests start with a specific problem: a gear that has failed, a gearbox that must run again, a part whose original manufacturer no longer supplies it, or a drawing that needs a manufacturer able to handle the full route including heat treatment. We are a manufacturer, not a trader: the parts are made in our plant in Piraeus, Greece.

Start with our capabilities, see how we manufacture to your drawing or from a sample, or go straight to the request-a-quote page.

Reasons you can verify

  • ISO 9001:2015 certified

    Certified quality management system covering design, production, repair and maintenance of gears, gearboxes and mechanical components, and steel heat treatment (InterCert, certificate 16-Q-0411040-TIC, valid until 12.10.2028).

    Learn more : ISO 9001:2015 certified
  • One manufacturing chain in-house

    Design, machining, gear cutting, heat treatment, grinding, assembly and inspection on one site. Fewer handovers between subcontractors, and one party responsible for the result.

    Learn more : One manufacturing chain in-house
  • Experience since 1965

    Six decades of manufacturing gears and machine parts, with spur and helical gears at the core of the work from the start, and parts for plastics machinery since 1985.

    Learn more : Experience since 1965
  • From drawing or from sample

    We have no catalogue: every part is made to your drawing, or from a sample or worn part after measurement and your approval of the drawing.

    Learn more : From drawing or from sample
  • Equipment for large gears and heavy parts

    Heavy gear hobbing, spiral bevel gear generation, a heavy facing lathe, horizontal boring mills and induction hardening of large gears tooth by tooth.

    Learn more : Equipment for large gears and heavy parts
  • Repair know-how

    Gearbox inspection, dismantling, repair and reassembly in our workshop, with a maintenance report listing the work done and the parts replaced.

    Learn more : Repair know-how
  • Engineering dialogue

    A gear and gearbox design department that recalculates gears, reviews your drawing and asks the right questions before quoting.

    Learn more : Engineering dialogue
  • Documented work

    Inspection of material, dimensions, hardness and gear form; heat-treatment records; inspection documents to EN 10204 as agreed.

    Learn more : Documented work
  • Documented size limits

    Gear cutting up to 4 m diameter and module 20, and spiral bevel gears up to 1,000 mm diameter and module 13.

    Learn more : Documented size limits

Why the in-house chain matters

Heat treatment and grinding in the same plant as machining

A case-hardened gear is only as good as the sequence behind it: the steel grade, the carburizing programme, the distortion during quenching and the grinding allowance must be planned together. When cutting, heat treatment and grinding are done by three different companies, each one optimises its own step. In our plant the same team plans the whole route, from raw material to the ground and inspected gear.

  • Grinding allowance planned for the expected heat-treatment distortion
  • Case depth chosen for the load and checked after treatment
  • No transport between subcontractors during manufacture
Copper induction coil heating a gear tooth red-hot while quenchant sprays around it

For plants in operation

Repair and spare parts when the original supplier cannot help

Many gearboxes in steel, cement, mining, port and plastics plants have outlived their original manufacturer’s support. We manufacture replacement gears, shafts and bushes to drawing or sample and repair the gearbox itself: incoming inspection, dismantling, damage assessment, replacement or repair of parts, reassembly with mesh check and functional test. See gearbox repair and overhaul and industrial spare parts.

  • Replacement of obsolete gears and shafts
  • Gear repair by fitting a new toothed rim on the existing body
  • Shaft repair by welding or metallizing and grinding
Disassembled heavy industrial gearbox with helical and bevel gear stages

What working with us looks like

  1. You send the data

    Drawing, sample description, photos, nameplate data, quantity and delivery location.

  2. Technical review

    We check the data and send our questions in one message.

  3. Quotation

    A written quotation with scope, inspection documents and delivery terms.

  4. Manufacture and inspection

    Manufacturing, heat treatment and inspection in our plant in Piraeus.

  5. Dispatch

    Packing and dispatch with the agreed documents; transport terms agreed per order.

Tell us about your part or gearbox

Send a drawing, photos or nameplate data. We will reply with questions or a quotation.

Please attach your technical drawings and specifications to your email.