Industries

Marine and Port Equipment: Gears, Gearboxes and Machined Parts

TSIRIKOS manufactures and repairs gears, gearboxes, shafts and machined components for ship machinery and port handling equipment, working to drawing or from the worn part. Our workshops are in the Piraeus area, Greece’s main port and ship-repair centre.

Marine propeller blade flange machined on a horizontal boring mill

Typical technical challenges

  • Salt water and corrosion

    Humidity and seawater attack shafts, bushes and housings. Material choice — stainless steel, bronze, coated or nitrided surfaces — and sealing matter as much as dimensions.

  • Intermittent, high-inertia crane loads

    Hoisting, slewing and travel drives of port cranes start and stop under load many times an hour. Gears, wheels and brakes see impact and reversing loads rather than steady torque.

  • Fixed windows for repair

    A ship’s port call or dry-dock period sets the time available for a repair. Technical questions must be settled quickly so that manufacture can start without back-and-forth.

  • Obsolete machinery

    Winches, steering gear, pumps and older cranes often outlive their manufacturers. Replacement gears and shafts must be measured and remade from the worn originals.

How we can support

Engineering considerations

Ship machinery

On board, gears and shafts sit in pumps, compressors, steering gear, winches, windlasses and propulsion auxiliaries. When one of them fails, the original manufacturer may no longer exist or may quote long lead times. Most of these parts can be reproduced from the worn original: we measure the geometry, establish the material and heat treatment and manufacture a replacement to the approved drawing. Our reverse engineering service and the guide Reverse engineering of mechanical spare parts describe the method.

Port cranes and bulk handling

Port cranes combine several gear drives: hoisting, boom luffing, slewing and gantry travel. Typical repair work includes worn travel wheels, slewing pinions, open-gear sets, and parallel-shaft or planetary gearboxes with pitted gears or damaged bearings. For bulk terminals, conveyors and ship loaders add further gearboxes and pulleys. We repair these gearboxes and manufacture the gears and shafts they need.

Large machined components

Our workshop includes horizontal boring mills and large lathes for heavy parts such as propeller-blade flanges, hubs, rings and housings, together with CNC machining centres for smaller components — see precision machining.

Working to the ship’s schedule

Send drawings or photos and dimensions of the damaged part, the equipment data, the required quantity and the port or yard where the part is needed. We review the data first and state the delivery date in our offer. Request a quote.

  • Slewing and hoisting drives

    Slewing pinions must suit the existing slewing ring: supply the ring data (module, number of teeth, profile shift) or measure the backlash and contact on site before ordering a new pinion.

  • Materials for marine service

    Carbon and alloy steels, stainless steels, nickel alloys, aluminium, copper and brass can be machined, as required by the drawing or the original part.

  • Classification society requirements

    Parts for classed vessels can be supplied with approved materials and surveyor attendance, arranged with the classification society for each order.

  • Inspection documents

    Inspection documents to EN 10204 (2.1, 2.2, 3.1, and 3.2 with an independent inspector) can be agreed with the order.

Technical FAQ

Can you remake a winch gear or shaft without a drawing?

Yes. We measure the worn gear or shaft (and, if possible, its mating part), define the material and heat treatment with you and prepare a drawing for your approval before manufacturing.

Do you repair port crane gearboxes?

Yes. Gearboxes are dismantled, inspected and repaired with new gears, shafts or bearings as needed, then reassembled and checked for tooth contact. Travel wheels can also be manufactured.

Do you work on ship pumps?

We repair gear pumps, cargo pumps and oil-pressure pumps and manufacture their gears, shafts and bushes. Send the pump data and photos of the damaged parts.

Can you machine propeller components?

Propeller-blade flanges and hubs are machined on our horizontal boring mills and large lathes. Send the drawing or describe the work required.

Can parts be supplied with class certificates?

This depends on the classification society and the part. Tell us the class requirements with your enquiry so that materials and inspections can be planned accordingly.

Marine and Port Equipment: Gears, Gearboxes and Machined Parts

Gears, gearboxes, shafts and machined parts for ship machinery, pumps, steering and propeller systems, port cranes and deck winches.

Please attach your technical drawings and specifications to your email.