Products

Industrial Gears, Gearboxes and Mechanical Components

TSIRIKOS manufactures industrial gears, gearboxes, shafts and pinion shafts, transmission components, extruder screws and barrels, custom machined parts and industrial spare parts — all to your drawing or sample, in its own workshops in Piraeus, Greece. There are no catalogue products: each part is made for its machine and application.

How we manufacture to your drawing

Most parts follow the same in-house sequence, from drawing review to final inspection. Steps that your part does not need are simply left out.

  1. Drawing review

    An engineer checks dimensions, tolerances, material, heat treatment, surface finish and the standards cited on the drawing, and clarifies open points with you before quoting.

  2. Material selection

    The steel is chosen for the application and the part’s requirements; steels of special composition are imported where needed.

  3. Machining and gear cutting

    Turning, milling, boring, gear hobbing and spiral bevel gear generation, spline and screw cutting.

  4. Heat treatment

    In-house gas carburizing, nitriding, nitrocarburizing, induction hardening or quenching and tempering, as specified.

  5. Finishing

    Gear tooth grinding after case hardening, cylindrical, surface and worm grinding to the final tolerances.

  6. Inspection and dispatch

    Dimensional, hardness, roughness and gear tooth form checks, then packing and dispatch on the agreed delivery terms.

Materials we commonly work

If the material is not stated on your drawing, it is defined with you from the application, the loads and the heat treatment required.

  • Carbon steels

    Low-, medium- and high-carbon steels for shafts, bushes, flanges and general machined parts.

  • Alloy steels for gears and shafts

    Case-hardening, through-hardening and nitriding grades, selected for the load and heat treatment of the part.

  • Special steels per application

    Steels of special composition, chosen and imported according to the application and the part’s requirements.

  • Stainless steels and nickel alloys

    For parts exposed to corrosion or high temperature, such as pump and process-equipment components.

  • Aluminium, copper and brass

    Non-ferrous parts such as bushes, housings and components where weight or conductivity matters.

  • Engineering plastics

    PTFE (Teflon) parts machined to drawing.

Have a drawing, a sample or a worn part?

Send it to us with the quantity and delivery location; an engineer will review it and reply.

Please attach your technical drawings and specifications to your email.