Manufactured in Greece for industrial customers abroad

Export: gears, gearboxes and mechanical components for industry abroad

TSIRIKOS manufactures gears, gearboxes, shafts and spare parts in Greece, to drawing or sample, for industrial customers abroad. You send us your drawings or a description of the part; we review the request, manufacture and inspect in our Piraeus works, and ship under the terms agreed for the order.

Large double-helical gear on a heavy vertical gear hobbing machine

What we offer

European manufacturing know-how for industry abroad

Since 1965, N. & G. TSIRIKOS S.A. has manufactured power-transmission and mechanical components for heavy industry at its works in Agios Ioannis Rentis, Piraeus. We have no catalogue: every part is made to the customer’s drawing, specification or original part.

For a plant outside Greece this means one contact for engineering, machining, gear cutting, heat treatment, grinding and inspection, followed by dispatch under the terms agreed for the order.

  • Made to drawing or sample, single parts or small batches
  • Machining, gear cutting, heat treatment, grinding and assembly in one plant
  • Technical review of your drawings and specific questions before the offer
  • Offers and commitments confirmed in writing
Heavy industrial gearbox strapped on a truck trailer for transport

What we supply to industrial customers abroad

New parts, spare parts or repairs: we work on the mechanical components of your equipment, from your drawings or from the original part.

  • Custom gears

    Spur, helical and double-helical gears, spiral bevel sets, worm gear sets and internal ring gears; gear cutting, case hardening and tooth grinding.

    Learn more : Custom gears
  • Industrial gearboxes

    Parallel-shaft and bevel-helical gearboxes designed for the application, gearbox components and complete overhauls in our workshop.

    Learn more : Industrial gearboxes
  • Shafts and pinion shafts

    Transmission shafts, pinion shafts and splined shafts (DIN 5480, ISO 14), machined, heat-treated and ground to drawing.

    Learn more : Shafts and pinion shafts
  • Spare parts

    Worn or obsolete parts remade from the original, with a drawing prepared and submitted for your approval.

    Learn more : Spare parts
  • Extruder screws and barrels

    Single and twin screws, barrels and plasticising parts: manufactured since 1985 and reconditioned, nitrided or nitrocarburized.

    Learn more : Extruder screws and barrels
  • Machined parts to drawing

    Rings, flanges, drums, rotors, housings and special parts in carbon and alloy steels, stainless steel, nickel alloys, aluminium or copper alloys.

    Learn more : Machined parts to drawing

Maintenance, planned shutdowns and hard-to-find parts

In cement plants, mining and mineral processing, steelworks and ports, mechanical failures tend to affect the same components: worn or pitted pinions and gear wheels, cracked or bent shafts, damaged splines and bearing seats. When the original manufacturer no longer supplies the part, or only with a long lead time, manufacturing to drawing or sample becomes the practical answer.

We make these parts as single pieces or small batches: industrial gears, shafts and pinion shafts and other industrial spare parts. For a complete gearbox we offer repair and overhaul in our workshop or a new industrial gearbox designed for your application.

Before a planned shutdown, identify the critical parts early and consult us in good time: the manufacturing time is set in the offer, after review.

What we check before quoting

  • the part definition: dimensioned drawing, tolerances, surface finish;
  • for a gear: module, number of teeth, pressure angle, helix angle and hand, accuracy grade;
  • material and heat treatment (carburizing, nitriding, induction hardening, quenching and tempering);
  • operating conditions: power, speed, torque, environment;
  • required inspection documents, quantity and delivery location.

Without a drawing, the reverse engineering process starts from the original part. Our quality and technical approach page describes the in-process and final inspections.

Your request for quotation from abroad, step by step

A simple process, confirmed in writing at each stage.

  1. Send your request

    Drawings (PDF, DWG/DXF, STEP), specification, photos and dimensions of the original part, quantity and delivery location. Without a drawing, photos and the main dimensions are enough to start.

  2. Technical review

    Our engineers review the request and ask what is needed: module, tolerances, material, heat treatment, operating conditions, required inspection documents.

  3. Written offer

    You receive a written offer stating the part definition, planned inspections, manufacturing time and proposed delivery terms.

  4. Manufacturing and inspection in Greece

    On receipt of the purchase order, the part is manufactured and inspected (dimensions, hardness, roughness, gear tooth form) in our Piraeus works.

  5. Dispatch

    Packing suited to the transport; mode of transport and Incoterm® agreed with the order. Import customs clearance in the destination country is usually handled by your freight forwarder.

Questions from international buyers

Where are the parts manufactured?

All parts are manufactured and inspected at our plant in Piraeus, Greece, and shipped under the terms agreed for the order. You deal directly with the manufacturer.

Do you already work for customers outside Greece?

Yes. The company also produces for customers abroad, mainly in North Africa and Mediterranean countries. We do not publish customer references without their consent.

In which language can we communicate?

We correspond in English and French as well as Greek. Technical and commercial correspondence, offers and documents can be in English or French; please state your preferred language in your request.

Do we need a drawing?

No. We manufacture to drawing or sample. Without a drawing, send photos, the main dimensions, the equipment reference and, if possible, the original part or the mating part; a drawing is prepared and submitted for your approval before manufacture. See our reverse engineering approach.

Which documents come with the parts?

Depending on the order: heat-treatment records and inspection documents to EN 10204 (types 2.1, 2.2 and 3.1; type 3.2 requires an independent inspector or one appointed by you). State the required documents in your request for quotation.

Which standards and units do you use?

We work to metric drawings and to the ISO, EN, DIN or AGMA standards specified by the customer, for example ISO 6336 or DIN 3990 for gear rating and ISO 1328 for accuracy grades.

How do shipping and customs clearance work?

The mode of transport (sea, road or air) is chosen for each order according to part size and urgency. Delivery terms (Incoterms® 2020, with a named place) are agreed for each order. Import customs clearance in the destination country is usually handled by your freight forwarder; for a gearbox sent to Greece for repair, check the applicable customs procedure with them before shipping.

Can you provide support on site abroad?

Yes. On-site support outside Greece, for example for measurements or installation, can be provided and is arranged case by case. Describe your need in your request.

What are your lead times?

We do not publish standard lead times: they depend on the part, the material, the heat treatment and the workshop load. The manufacturing time is stated in the offer after review of your request. For a planned shutdown, contact us as early as possible.

Send us your drawings

Drawing, specification, photos or original part: send us what you have and we will review your request.

Please attach your technical drawings and specifications to your email.