Services · Repair

Industrial Mechanical Repair: Pumps, Gears, Shafts and Extruder Parts

Besides gearboxes, TSIRIKOS repairs worn and damaged mechanical components in its Piraeus workshop: gear pump and other pump components, gears, shafts, extruder screws and barrels and special machine parts. Repairs combine welding or metallizing, re-machining, grinding and heat treatment; where repair is not economical, a new part is manufactured.

Gear pump body with two meshing spur gears

Main applications

Repair work we carry out

  • Pump components

    Gears, rotors, shafts and bushes for gear pumps, oil pressure pumps and cargo pumps, repaired or remanufactured to drawing or sample.

  • Complete pump overhaul and testing

    Full overhaul of complete pumps, including performance testing, with the scope defined per pump type.

  • Gear repair

    Damaged gears repaired, for example by removing the worn toothed rim and fitting a new one on the existing body; otherwise a new gear is made.

    Learn more : Gear repair
  • Shaft repair

    Worn bearing seats and journals restored by grinding, or by heterogeneous welding or metallizing followed by final grinding.

    Learn more : Shaft repair
  • Extruder screw and barrel reconditioning

    Removal of damaged material, deposit of new material, machining back to nominal dimensions and roughness, and nitriding or nitrocarburizing.

    Learn more : Extruder screw and barrel reconditioning
  • Hardfacing alloys for screw flights

    Screw flights are rebuilt by welding with hardfacing alloys, with the welding process and alloy chosen for each screw.

  • Grinding of large rings and bearing seats

    Grinding of large-diameter rings and bearing seats, long shafts and rolls.

  • Special repairs of machinery

    Repair of mechanical assemblies such as winches, drives and special machines, assessed case by case after inspection.

Repair of components, not only gearboxes

Many breakdowns concern a single component: a gear pump with worn gears, a shaft with a damaged bearing seat, an extruder screw whose flights have lost their diameter, a winch drum or a special part with no available spare. We repair these components in the same workshop where we manufacture new ones, so the choice between repair and replacement is made on technical grounds.

For complete gearboxes, see gearbox repair and overhaul.

Pump components

Gear pumps, oil pressure pumps and cargo pumps wear at the gears, the shafts and the bushes. We repair or remanufacture these components to drawing or from the worn part: gears with the right tooth geometry and hardness, shafts with ground journals, and bushes with the right clearance. We also overhaul and test complete pumps, with the scope defined per pump type.

Shafts and bearing seats

A worn journal or seal track does not always mean a new shaft. Depending on the damage, the shaft is repaired by grinding to an undersize, or the material is rebuilt by heterogeneous welding or metallizing and the journal is then ground to its nominal dimension. If a shaft is cracked, a new one is the safe answer; see shafts and pinion shafts.

Gears

When the gear body and bore are sound, a worn toothed rim can be removed and replaced with a new rim, which is then cut. When this is not possible, a new gear is manufactured, if necessary by measuring the old one; see reverse engineering.

Extruder screws and barrels

We have manufactured and repaired parts for plastics machinery since 1985. A worn screw is reconditioned by removing the damaged material, depositing new material, machining back to nominal dimensions and roughness, and restoring the surface hardness by nitriding or nitrocarburizing. Grinding of screws and barrels is part of the same process. More on extruder screws and barrels.

Special repairs

Winches, drives and special machines are assessed case by case: we inspect, measure, propose the repair and, where needed, manufacture the missing parts. Heat treatment for repaired parts is carried out in our own heat-treatment department.

What to send

Photos of the damaged part, its main dimensions or drawing, the material if known, and a short description of the machine and the damage. Use the request for quotation page; we will tell you whether we recommend repair or a new part.

How we work

  1. Inspection and measurement

    The part is cleaned, measured and examined for wear, cracks and deformation.

  2. Repair or replace decision

    We propose a repair method or a new part, depending on the damage, the material and the remaining life.

  3. Material deposit

    Welding or metallizing where material must be rebuilt.

  4. Re-machining and grinding

    Turning, milling and grinding back to the nominal dimensions and roughness.

  5. Heat treatment

    Nitriding, nitrocarburizing or induction hardening to restore the surface hardness where required.

  6. Final inspection

    Dimensional, roughness and hardness check before dispatch.

Quality considerations

  • Dimensional inspection

    Diameters, run-out, concentricity and ovality checked with calibrated measuring instruments.

  • Crack examination

    Surfaces examined for micro-cracks before and after repair.

  • Hardness and roughness

    Surface hardness after heat treatment and roughness after final grinding are measured.

Technical FAQ

When is repairing a shaft better than making a new one?

Repair usually pays when the damage is local, for example a worn bearing seat or seal track, and the shaft is long, large or made of an expensive steel. If the shaft is cracked, bent beyond correction or heavily worn over its length, a new shaft is the safer solution.

How is a worn extruder screw reconditioned?

The damaged material is removed, new material is deposited on the flights, the screw is machined back to its nominal dimensions and roughness and then nitrided or nitrocarburized.

Do you repair complete pumps?

Yes. We repair and remanufacture pump components such as gears, rotors, shafts and bushes, and we overhaul and test complete pumps. The scope is defined per pump type, so please describe the pump in your request.

Can a damaged gear be repaired?

In some cases, yes: if the gear body is sound, the worn toothed rim can be replaced. Often, however, manufacturing a new gear is the more reliable option; we advise after inspection.

Can you repair parts from plants outside Greece?

Yes, the parts are shipped to our workshop in Greece; we have no repair facility abroad. Transport and delivery terms are agreed case by case.

Request for quotation — Industrial Mechanical Repair: Pumps, Gears, Shafts and Extruder Parts

Repair and reconditioning of pump components, gears, shafts, extruder screws and barrels and special machine parts, or manufacture of new parts where repair does not pay.

Please attach your technical drawings and specifications to your email.